WLAN Settings WDS Settings for the MediaLink MWN-WAPR150NRouter Sceenshot

Back to the MediaLink MWN-WAPR150N



Screenshots from PortForward.com


  Help   WDS (Wireless distribution System) supports three modes: Lazy, Bridge and Repeater. Lazy Mode: in this mode, you need to input the Router's Wireless MAC address (BSSID) in connecting device and the connecting Device should be in Bridge or Repeater mode. Then the wireless network will be established automatically in this mode. Bridge: in this mode, you need to add the Wireless MAC address of the connecting device into the Router's AP MAC address table or select one from the scanning table. At the same time, the connecting device should be in Lazy, Repeater or Bridge mode. Repeater: in this mode, you need to add the MAC address of the connecting device into the Router's AP MAC address table and the connecting client should be in Lazy, Repeater or client mode.    WDS Settings WDS Mode Disable Lazy Mode Bridge Mode Repeater Mode Encrypt Type NONE WEP TKIP AES Default Key Key 1 Key 2 Key 3 Key 4 WEP Key 1 : ASCII Hex WEP Key 2 : ASCII Hex WEP Key 3 : ASCII Hex WEP Key 4 : ASCII Hex Pass Phrase AP MAC AP MAC AP MAC AP MAC   Attention: To configure WDS 1. In the MAC address field, input the connected device's MAC address. If the connected device has configured the WDS encryption method, please enter the same key values. 2. If you need to authorize wireless client's access, please configure the settings in the "Wireless Settings->Security Setting" window. After the configuration is completed, click "Save" and reboot the Router to implement communication between the WDS device. Choose SSID MAC Channel Security Signal -->      
Home > Screenshots > MediaLink > MWN-WAPR150N > WLAN Settings WDS Settings