DHCP Settings for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest® Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:22:23 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED DHCP Settings Your Broadband Modem will automatically assign an IP Address to each device in your network. If you are using an additional Router to assign these IP Addresses, you will need to disable DHCP. 1. Set the DHCP server state. If “disable” is selected proceed to step 5 below to apply the change DHCP Server: Enable     Disable 2. Set the IP Addressing values. Beginning IP Address: Ending IP Address: Subnet Mask: 3.Set the DHCP server lease time. DHCP Server Lease Time:  Days  Hours  Minutes 4.Set the DNS Values. DNS:  Dynamic   Static DNS Server 1: DNS Server 2: 5. Click "Apply and Reboot" to save your changes. Copyright © 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > DHCP Settings