IP QoS Upstream Settings for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:22:56 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED IP QoS Upstream Settings Enabling the IP QoS feature, allows for the prioritization of certain types of traffic flows (such as VoIP) before standard data traffic. Traffic shaping your network with QoS can also increase application perormance and prevent your network from becoming overloaded. Follow Steps 1-8 below to setup IP QoS. 1. Set the Upstream QoS state. Upstream QoS: Enabled Disabled   2. Select Qwest Default QoS or Custom QoS Below. QoS Type: Qwest Default QoS Custom QoS   3. Click "Apply and Reboot" to save your changes. QoS Rule List Name Priority TOS Protocol Source IP Information Destination IP Information Edit No Entries Defined.   Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > IP QoS Upstream Settings