LAN Subnets for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest

Screenshots from

Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help Wednesday, October 20, 2010 9:22:28 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED LAN Subnets Your broadband modem can be configured to support up to seven secondary LAN Subnets. The DHCP Server must be enabled to use this feature. 1. Set the LAN Subnet state below. LAN Subnets: Enable     Disable   2. Set the IP Addressing information for the additional subnet. LAN IP Address: LAN Subnet Mask: DHCP Start Address: DHCP End Address:   3. Click "Add" to add a new IP Subnet. 4. Click "Apply and Reboot" to save your changes. LAN Subnets Added IP Address Subnet Mask DHCP Start Address DHCP End Address Edit No Entries Defined.   Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > LAN Subnets