NAT for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:24:13 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED NAT Warning: Please do not disable NAT unless instructed to do so by your ISP. Turning off NAT will open your Broadband Modem to outside intrusion, creating a security risk. NOTE: If using unnumbered mode NAT does not need to be disabled, if you would like to Allocate your Static IP's via the DHCP server or if VIP is in use. 1. Set the NAT State. Enable     Disable 2. Click "Apply" to save your changes. Copyright 2010 Qwest, All Rights Reserved