Remote GUI for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:23:02 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED Remote GUI If you want to access the GUI of your Broadband Modem remotely, please turn Remote GUI On. In order to enable Remote GUI an Admin Username and Password must be set below. Remote GUI is default set to port 80 for HTTP access. If port 80 has been forwarded to a deviceon the LAN you will need to change the default Remote GUI port below to allow for remote access. To access your modem remotely you will need to use http:// followed by the modem IP. 1. Set the Remote GUI state below. Remote GUI: Enable     Disable   2. Enter your Admin Username and Password. Admin Username: Admin Password:   3. Set the Remote GUI port. Remote GUI Port:   4. Set the Remote GUI timeout. Disable Remote GUI After: AlwaysOn Disable on Boot 24 hours 12 hours 30 minutes 15 minutes   5. Click "Apply" to save changes. Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > Remote GUI