Remote Telnet for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:23:06 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED Remote Telnet If you want to access your Broadband Modem remotely via telnet, please turn remote telnet on. In order to enable remote telnet a Telnet Username and Password must be set below.   1. Set the remote telnet state below. Remote Telnet: Enable     Disable   2. Enter the telnet user name and password below. Telnet Username: Telnet Password:   3. Set the idle disconnect time below. Idle Disconnect After: No Idle Disconnect 7 days 24 hours 12 hours 30 minutes 15 minutes   4. Click "Apply" to save changes. Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > Remote Telnet