Static Routing for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:23:21 AM Broadband Settings IP Addressing DHCP Settings LAN Subnets LAN IP Address WAN IP Address VLAN QoS IP QoS Settings Upstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Admin User Name & Password Advanced Port Forwarding Applications DMZ Hosting Firewall Settings NAT UPnP IPSec Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED Static Routing Enter the Static Route information below. 1. Set the static routing information below.    Destination IP:    Subnet Mask:    Gateway IP:   2. Click "Add" to add the static route. Repeat step 1 and 2 to add additional static routes before selecting "Apply and Reboot". 3. Click "Apply and Reboot" to save your changes.   Static Routes Destination IP Subnet Mask Gateway IP Edit No Entries Defined.   Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > Static Routing