Wireless Basic Settings for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest

Screenshots from PortForward.com

Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:20:46 AM Basic Settings Multiple SSID WEP WPA or WPA2 WMM WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED Basic Settings To enable and secure a wireless network follow the steps below. 1. Set the Wireless State. Wireless: Enable    Disable   2. Change the SSID setting to any name or code you want. SSID:   3. Secure your wireless network by choosing a privacy setting. 64-Bit WEP: Off   4. Choose to use the Default WEP Key or enter your own. Use Factory Default 64-Bit WEP Key: Default WEP Key: \ Create a 64-Bit WEP Key: A 64-bit Wep Key is 10 digits using letters A-F and/or numbers 0-9.   5. Write down wireless settings. Every device connected to your wireless broadband modem MUST use the SAME settings listed below. Wireless: Enabled SSID: \ Privacy Setting: 64-Bit WEP 64-BIT WEP Key: \   6. Click "Apply and Reboot" to save your changes. Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > Wireless Basic Settings