Wireless WPS for the Motorola 3347 - QwestRouter Sceenshot

Back to the Motorola 3347 - Qwest



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Motorola 3347 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup qwest.com help Wednesday, October 20, 2010 9:21:19 AM Basic Settings Multiple SSID WEP WPA or WPA2 WMM WPS SSID Broadcast Wireless MAC Authentication 802.11b/g Mode Channel Connection Status: Qwest Broadband: CONNECTED   1536 / 736 Kbps ISP Status: CONNECTED WPS (Wi-Fi Protected Setup) WPS is a standard for easy and secure establishment of a wireless home network. To enable WPS, follow the steps below. 1. Set the WPS state. WPS: Enable Disable   2. Click "Apply and Reboot" to save your changes.   Connecting a device with WPS 1. Set the WPS type. WPS Type: End Device PIN Push Button (PBC)   2. Select connect below to initiate a WPS connection in the modem.   WPS Device List: Name IP Address MAC Address WPS State WPS Type No Entries Defined.     Copyright 2010 Qwest, All Rights Reserved
Home > Screenshots > Motorola > 3347 - Qwest > Wireless WPS