Basic Router Setup for the Motorola MG7550Router Sceenshot

Back to the Motorola MG7550



Screenshots from PortForward.com


Motorola Cable Modem : Router Basic -> DHCPv6 Back Back to Basic Page   Status Basic Router Advanced Router   Wireless Protection & Parental Control   VPN Software Connection Diagnostics Security Event Log Setup DHCP DHCPv6 LAN IPv6 DDNS Backup/Restore Options IP Filtering MAC Filtering Port Filtering Forwarding Port Triggers RIP DMZ Basic Radio WPS RADIUS WEP Guest Access Advanced WMM Scan/Bridge Firewall Basic Firewall EventLog Parental Control IPsec L2TP/PPTP Event Log Setup    LAN        IPv6 Address IPv6 Address: This is the IPv6 Address assigned to the LAN side of your cable modem/router.       IPv6 Prefix IPv6 Prefix: The IPv6 routing prefix. This prefix may be the link local IPv6 prefix fe80::/64 or a prefix assigned by your cable service provider.       IPv4 Address . . . IPv4 Address: This is the IPv4 Address assigned to the LAN side of your cable modem/router. By default, this is 192.168.0.1. If you change this value, you will need to also change the Starting Address of Local Pool on the page Basic-->DHCP. You can enter a new value and click Save to save it.       MAC Address MAC Address: The unique physical address assigned to your cable modem's LAN port.       Interface/Prefix   Interface/Prefix: List of your device's LAN Interfaces and their IPv6 Prefixes.    Interface/Prefix List of your device's LAN Interfaces and their IPv6 Prefixes. -->    WAN        IPv4 MTU Size IPv4 MTU Size: The maximum packet size in bytes transmitted to the Internet. Range: 600 - 1500. The default value of 0 selects MTU size of 1500 bytes. You can enter a new value and click Save to save it.   
Home > Screenshots > Motorola > MG7550 > Basic Router Setup