Troubleshoot for the Motorola NVG510Router Sceenshot

Back to the Motorola NVG510



Screenshots from PortForward.com


Diagnostics Device Broadband Home Network Voice Firewall Diagnostics Troubleshoot Logs Update Resets Troubleshoot   Running this test will help locate problems with your Internet Connection. Ethernet - DSL - PTM - Authentication - IP - DNS - Test Internet Access Enter an Internet Address in the 'Address' field and click on the button of the test to perform.   Address    Progress Window Help This "Multi-layer" diagnostic examines the functionality of the device from the physical connections to the application traffic being sent by users through the device. This sequence of tests takes approximately one minute to generate results. Each test generates one of the following result codes: Pass: The test was successful. Fail: The test was unsuccessful. Skipped: The test was not performed because a pre-requisite test failed or the test is not appropriate. Test Internet Access Enter an address (www.motorola.com) or an IP address (163.176.4.31) in the "Address" field and click on: "Ping" to see if this device can loop a message back and forth to the remote host. "Traceroute" to see what route or nodes the packet goes through to get to the remote host. "NSLookup" to see if the host name is translated by a Name Server to an IP address. Results will be displayed in the "Progress Window" as they are generated. 2011 Motorola Mobility Intellectual Property.
Home > Screenshots > Motorola > NVG510 > Troubleshoot