Basic MoCA Configuration and Status for the Motorola SBG6782-ACRouter Sceenshot

Back to the Motorola SBG6782-AC



Screenshots from PortForward.com


Basic - MoCA --> Logout SURFboard SBG6782-AC HOME STATUS Product Information Connection Security Diagnostics Event Log Configuration BASIC Setup DHCP DDNS Backup and Restore MoCA ADVANCED Options IP Filtering MAC Filtering Port Filtering Port Triggers Port Forwarding DMZ Host WIRELESS 802.11 Radio Primary Network Settings Guest Network Settings Access Control Extend Network Range Quality of Service Advanced FIREWALL Protection Level Parental Control Local Log Remote Log HELP Overview About Basic - MoCA: Configuration and Status The MoCA interface allows the creation of a reliable home network using your existing installed coaxial wiring to provide Internet Protocol (IP) connectivity with MoCA-capable set top boxes. In addition, MoCA coaxial adapters may be added to connect computers, smart TVs, DVD players, gaming consoles and other network devices. This page shows configuration parameters, status information and the list of connected MoCA devices. Configuration MoCA   Enabled Help Enable or disable the MoCA interface of the SBG6782-AC. If the SBG6782-AC is not the MoCA Network Controller, it has no effect on the other devices on the MoCA network. If the SBG6782-AC is the MoCA Network Controller, disabling the MoCA interface on the SBG6782-AC will allow another device to become the MoCA Network Controller. This setting and others below will appear grayed out if the SBG6782-AC is managed by your service provider. Operational Frequency SCAN 1150 MHz (D1) 1200 MHz (D2) 1250 MHz (D3) 1300 MHz (D4) 1350 MHz (D5) 1400 MHz (D6) 1450 MHz (D7) 1500 MHz (D8) Help MoCA transmits data over the home's coax on a frequency between 1150 MHz and 1500 MHz. The SBG6782-AC may be configured to use a specific frequency or to scan for other devices already transmitting on the network. Most CATV systems use 1150 MHz so you should not need to change this parameter. Available D-Band Channels - (D-Band: 1150-1500 MHz) 1 2 3 4 5 6 7 8 Max Beacon Power Level 10 (Max) 9 (-3dB) 8 (-6dB) 7 (-9dB) 6 (-12dB) 5 (-15dB) 4 (-18dB) 3 (-21dB) 2 (-24dB) 1 (-27dB) Help It is occasionally necessary to reduce the MoCA beacon power level to solve communication problems in the home. The default setting of 10 allows the device to transmit beacon signals at maximum power. The beacon power may be reduced by 3 to 27dB in 3dB increments. Transmit Power Level 10 (Max) 9 (-3dB) 8 (-6dB) 7 (-9dB) 6 (-12dB) 5 (-15dB) 4 (-18dB) 3 (-21dB) 2 (-24dB) 1 (-27dB) Help This setting restricts the overall transmit power level. The default setting of 10 allows the device to transmit at its maximum power. The transmit power may be reduced by 3 to 27dB in 3dB increments. Privacy   Enabled    Help MoCA can encrypt data carried over the home's coax to protect the data from unauthorized devices. If enabled, a password consisting of 12 to 17 numeric digits must be entered. This password needs to be the same on all devices. Status Link State Down Help The MoCA Link is considered "up" if the MoCA interface is enabled and two or more devices are able to communicate on the network. If up, the elapsed time since the device joined the network is also displayed. HOME STATUS Product Information Connection Security Diagnostics Event Log Configuration BASIC Setup DHCP DDNS Backup and Restore MoCA ADVANCED Options IP Filtering MAC Filtering Port Filtering Port Triggers Port Forwarding DMZ Host WIRELESS 802.11 Radio Primary Network Settings Guest Network Settings Access Control Extend Network Range Quality of Service Advanced FIREWALL Protection Level Parental Control Local Log Remote Log HELP Overview About 2013 MOTOROLA MOBILITY, LLC. ALL RIGHTS RESERVED.
Home > Screenshots > Motorola > SBG6782-AC > Basic MoCA Configuration and Status