Wireless 802.11 Radio for the Motorola SBG6782-ACRouter Sceenshot

Back to the Motorola SBG6782-AC



Screenshots from PortForward.com


Wireless - 802.11 Radio --> Logout SURFboard SBG6782-AC HOME STATUS Product Information Connection Security Diagnostics Event Log Configuration BASIC Setup DHCP DDNS Backup and Restore MoCA ADVANCED Options IP Filtering MAC Filtering Port Filtering Port Triggers Port Forwarding DMZ Host WIRELESS 802.11 Radio Primary Network Settings Guest Network Settings Access Control Extend Network Range Quality of Service Advanced FIREWALL Protection Level Parental Control Local Log Remote Log HELP Overview About Wireless - 802.11 Radio Configure the SBG6782-AC's Wi-Fi radio.  2.4 GHz   5 GHz  Wi-Fi Radio Settings Wireless Radio Enable Enabled Disabled Output Power 25% 50% 75% 100% Help Your network's Wi-Fi signal strength is controlled by this setting. The signal strength can be decreased from full power (100%) to reduce the network's range. The power can be decreased to reduce interference to other networks in the area and to limit the access to your network to a smaller geographic area. Band Selection 2.4 GHz 5 GHz    802.11 Mode b only mode b/g mode g/n mode b/g/n mode n only mode Help Select the 802.11 communication modes to best match the other devices on your network. You may see improved performance if you limit your network to only Wireless-N (802.11n) devices. Select additional modes for maximum compatibility with older equipment. Retain the default settings of b/g/n for 2.4GHz and a/n for 5GHz if you are unsure. 802.11n Support Required Off On --> Help Setting this to Yes will require all devices to use 802.11n to connect to the network. Wireless-N (802.11n) technology is a standard for high-speed Wi-Fi networks. Newer devices are typically capable of using Wireless-N. However, when devices connect to the network that are not using N-mode, the performance of the N-mode devices will be impacted. --> Bandwidth 20 Mhz 40 Mhz    Current Bandwidth: 20MHz Help The standard bandwidth for 2.4 GHz Wi-Fi networks is 20 MHz. Increasing the bandwidth can increase the amount of data that the network can carry. However, if the SBG6782-AC detects another Wi-Fi network using frequencies in the wider bandwidth, the SBG6782-AC will automatically reduce the bandwidth to the normal 20 MHz width. Sideband Lower Upper    Current Sideband: Lower Channel Auto 1 2 3 4 5 6 7    Current Channel: 6 ***Interference Level: Acceptable Spatial Auto On Off --> HOME STATUS Product Information Connection Security Diagnostics Event Log Configuration BASIC Setup DHCP DDNS Backup and Restore MoCA ADVANCED Options IP Filtering MAC Filtering Port Filtering Port Triggers Port Forwarding DMZ Host WIRELESS 802.11 Radio Primary Network Settings Guest Network Settings Access Control Extend Network Range Quality of Service Advanced FIREWALL Protection Level Parental Control Local Log Remote Log HELP Overview About 2013 MOTOROLA MOBILITY, LLC. ALL RIGHTS RESERVED.
Home > Screenshots > Motorola > SBG6782-AC > Wireless 802.11 Radio