Wireless for the Motorola WR850Gv6Router Sceenshot

Back to the Motorola WR850Gv6



Screenshots from PortForward.com


Motorola Home Networking Product WR850G   WIRELESS This page allows you to configure your wireless network. Wireless Interface:      motorola \ (\) Select Network Name (SSID):      Open network broadcasts its SSID; a Closed only responds to active scan from clients for its SSID.', LEFT);" onmouseout="return nd();" width=310>Network Type:      Open Closed On disables client-to-client communications.', LEFT);" onmouseout="return nd();" width=310>AP Isolation:      Off On Wireless Enabled:      No Yes Country:       Band:      802.11g (2.4 GHz) Channel:          Current: 8 Compatibility for widest use with 802.11g and 802.11b clients, Performance for best service if used only with 802.11g clients, LRS if you are experiencing difficulty with legacy 802.11b clients, or 802.11b only for best service if used only with 802.11b clients.', LEFT);" onmouseout="return nd();" width=310>Wireless Mode:      Compatibility Performance LRS 802.11b Only Auto if Wireless Mode is set to Compatibility or LRS , otherwise it is recommended to turn this feature Off .', LEFT);" onmouseout="return nd();" width=310>802.11g Protection Mode:      Off Auto       Rate:      Auto 1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Basic Rate Set:      Default All 1 & 2 Mbps Multicast Rate:      Auto 1 Mbps 2 Mbps 5.5 Mbps 6 Mbps 9 Mbps 11 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps Fragmentation Threshold:      RTS Threshold:      DTIM Interval:      Beacon Interval:      Preamble Type:      Long Short Maximum Associations:      Frame Bursting:      Off On Performance Enhancement (GP models only):      Off On Performance Enhancement must be Off to enable WMM Support.', LEFT);" onmouseout="return nd();" width=310>WMM Support:      Off On No-Acknowledgement:      Off On EDCA AP Parameters:      CWmin CWmax AIFSN TXOP(b) Limit (microsecond) TXOP(a/g) Limit (microsecond) Admin Forced Background AC      Off On Best Effort AC      Off On Video AC      Off On Voice AC      Off On EDCA Client Parameters:   Background AC      Off On Best Effort AC      Off On Video AC      Off On Voice AC      Off On Access Point/Wireless Bridge rather than a Wireless Bridge Only . Wireless bridge operation (also known as Wireless Distribution System or WDS functionality) enables wireless communications only with other wireless bridges to build a larger wireless network.', LEFT);" onmouseout="return nd();" width=310>Wireless Bridge Operation:      Access Point/Wireless Bridge Wireless Bridge Only Bridge Link Detection Interval:      Enabled to limit WDS connections from those listed under Recognized Bridges . Select Disabled to accept WDS connection from any access point.', LEFT);" onmouseout="return nd();" width=310>Wireless Bridge Restriction Mode:      Enabled Disabled Wireless Bridge Restriction Mode is Disabled on this AP, its wireless MAC address must be specified in the Recognized Bridges list of the other AP to setup a WDS connection.', LEFT);" onmouseout="return nd();" vAlign=top rowSpan=5 width=310> Recognized Bridges:      Peer MAC Address    Link Status                         Disabled if no such filtering is desired.', LEFT);" onmouseout="return nd();" width=310>Wireless MAC Restriction Mode:      Disabled Allow Deny Wireless MAC Restriction Mode . The MAC address format is XX:XX:XX:XX:XX:XX.', LEFT);" onmouseout="return nd();" vAlign=top rowSpan=8 width=310> Restricted Wireless MAC Addresses:                           Authenticated Clients:      MAC Address Associated Authorized WME Link \ Yes No No    -->
Home > Screenshots > Motorola > WR850Gv6 > Wireless