IP Filters - Custom for the Motorola i600Router Sceenshot

Back to the Motorola i600



Screenshots from PortForward.com


>Advanced>Custom IP Filters HOME SETUP ADVANCED TOOLS STATUS LOGOUT --> UPnP --> SNTP --> IP QoS --> Port Forwarding --> IP Filters --> LAN Clients --> Static Routing --> Dynamic Routing --> Remote Web Access --> Ethernet Switch Custom IP Filters << Back to IP Filters   Filter Name: Enable Source IP: Source Netmask: Destination IP: Destination Netmask: Port Start: Port End: Protocol: TCP UDP TCP and UDP ICMP Any   Enabled Name Source IP Mask Destination IP Mask Port Start Port End Protocol Edit Delete There is no custom IP filters rule --> On this page, you can: Create custom IP filter rule(s) Delete custom IP filter rule(s) Note: if you want to add a simple custom rule based only on port numbers, use the settings on the main IP filters page. Follow the link 'Back to IP Filters' to go to the main IP Filters page. How to create a custom IP filter rule: Check the 'Enable' checkbox Enter the name of the custom rule in the 'Filter Name' textbox Enter this information about the source computer, from which incoming traffic comes:   IP address in the 'Source IP Address' textbox, e.g: 192.168.15.5   Network subnet mask in the 'Source Netmask' textbox, e.g: 255.255.255.0   Note: enter '*' to indicate that any value is valid for the above fields Enter this information about the destination computer, to which the source IP will be blocked access:   IP address in the 'Destination IP Address' textbox, e.g: 150.15.10.2   Network subnet mask in the 'Destination Netmask' textbox, e.g: 255.255.0.0   Starting port number in the 'Port Start' textbox, e.g: 4000   Ending port number in the 'Port End' textbox, e.g: 5000   Note: enter '*' to indicate that any value is valid for the above fields Choose the protocol (TCP, UDP, both) of the data traffic that this rule will be applied to Click the Save button How to delete custom IP filter rule(s): Check the Delete checkbox(es) corresponding to the IP filter rule(s) you want to delete Click the Save button
Home > Screenshots > Motorola > i600 > IP Filters - Custom