LAN Clients for the Motorola i600Router Sceenshot

Back to the Motorola i600



Screenshots from PortForward.com


>Advanced>LAN Clients HOME SETUP ADVANCED TOOLS STATUS LOGOUT --> UPnP --> SNTP --> IP QoS --> Port Forwarding --> IP Filters --> LAN Clients --> Static Routing --> Dynamic Routing --> Remote Web Access --> Ethernet Switch LAN Clients Reserve LAN IP addresses Enter IP Address: Hostname: MAC Address: (format xx:xx:xx:xx:xx:xx) Static Addresses Delete IP Address Hostname MAC Type There is no static LAN client     Dynamic Addresses Reserve IP Address Hostname MAC Type 192.168.15.2 rt Dynamic 192.168.15.4 router Dynamic Point at the error marker to see the error description   --> On this page, you can: Add a static LAN client Delete static LAN client(s) Reserve a dynamic IP address for a static LAN client How to add a static LAN client: Enter the IP address of the LAN client in the 'IP Address' textbox, e.g: 192.168.15.10. Note: the IP address must reside in the same subnet as the gateway. Enter the hostname of the LAN client in the 'Hostname' textbox Enter the MAC address of the LAN client in the 'MAC Address' textbox. The MAC address is in colon-separated format, e.g: 00:11:22:33:44:55. Click the Save button How to delete static LAN client(s): Check the Delete checkbox(es) corresponding to the static LAN client(s) you want to delete Click the Save button How to reserve a dynamic IP address for a static LAN client: If the table of Dynamic Addresses is not displayed, then there is no dynamic IP address available to reserve. This table is displayed only if there is at least one attached DHCP LAN client. If it is displayed, check the Reserve checkbox(es) corresponding to the dynamic IP address(es) you want to reserve for static clients Click the Save button
Home > Screenshots > Motorola > i600 > LAN Clients