Virtual Servers for the NetComm NB304NRouter Sceenshot

Back to the NetComm NB304N

Screenshots from

NAT -- Virtual Servers Setup Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol and External port) to the Internal server with private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum 32 entries can be configured. Server Name External Port Start External Port End Protocol Internal Port Start Internal Port End Server IP Address WAN Interface Remove  DemonwarePortMapping  3074  3074  UDP  3074  3074  pppoa0  Teredo  58341  58341  UDP  58341  58341  pppoa0  Teredo  54577  54577  UDP  54577  54577  pppoa0  Teredo  60811  60811  UDP  60811  60811  pppoa0 to 3658 (UDP)  3658  3658  UDP  3658  3658  pppoa0  Teredo  61274  61274  UDP  61274  61274  pppoa0
Home > Screenshots > NetComm > NB304N > Virtual Servers