Power Management for the NetComm NB604NRouter Sceenshot

Back to the NetComm NB604N

Screenshots from PortForward.com

Power Management This page allows control of Hardware modules to evaluate power consumption. Use the control buttons to select the desired option, click Apply and check the status response. MIPS CPU Clock divider when Idle   Enable     Status: Enabled Wait instruction when Idle   Enable     Status: Enabled DRAM Self Refresh   Enable     Status: Enabled Ethernet Auto Power Down   Enable     Status: Enabled Number of ethernet interfaces in:  Full power mode: 0  Low power mode: 4
Home > Screenshots > NetComm > NB604N > Power Management