Wireless Security for the NetComm NB604NRouter Sceenshot

Back to the NetComm NB604N

Screenshots from PortForward.com

Wireless -- Security This page allows you to configure security features of the wireless LAN interface. You may setup configuration manually          OR through WiFi Protected Setup (WPS)      WPS Setup        Enable WPS Enabled Disabled        Enable Build-In Registrar Enabled Disabled        Add Client (This feature is available only when WPA-PSK, WPA2 PSK or OPEN mode is configured) Push-Button PIN              Help        Set WPS AP Mode Configured Unconfigured        Setup AP (Configure all security settings with an external registrar) Push-Button PIN               Device PIN    Help Manual Setup AP You can set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Apply/Save" when done. Select SSID: NetComm Wireless NetComm Wireless 2 NetComm Wireless 3 NetComm Wireless 4     Network Authentication: WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA/WAPI passphrase:    Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA/WAPI Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Current Network Key: Network Key 1: Network Key 2: Network Key 3: Network Key 4:   Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys   Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys     WAPI Certificate Certificate Status:   ASU Certificate File: User Certificate File:    
Home > Screenshots > NetComm > NB604N > Wireless Security