System Log Configuration for the NetComm NB7Router Sceenshot

Back to the NetComm NB7



Screenshots from PortForward.com


System Log -- Configuration If the log mode is enabled, the system will begin to log all the selected events. For the Log Level, all events above or equal to the selected level will be logged. For the Display Level, all logged events above or equal to the selected level will be displayed. If the selected mode is 'Remote' or 'Both,' events will be sent to the specified IP address and UDP port of the remote syslog server. If the selected mode is 'Local' or 'Both,' events will be recorded in the local memory. Select the desired values and click 'Save/Apply' to configure the system log options. Log: Disable Enable Log Level: Emergency Alert Critical Error Warning Notice Informational Debugging Display Level: Emergency Alert Critical Error Warning Notice Informational Debugging Mode: Local Remote Both Server IP Address: Server UDP Port:
Home > Screenshots > NetComm > NB7 > System Log Configuration