WAN Setup - Summary for the NetComm NB7Router Sceenshot

Back to the NetComm NB7



Screenshots from PortForward.com


WAN Setup - Summary Make sure that the settings below match the settings provided by your ISP. PORT / VPI / VCI: 0 / 0 / 35  Connection Type: PPPoE  Service Name: pppoe_0_0_35_1  Service Category: UBR  Service Category: UBR  --> IP Address: Automatically Assigned  Service State: Enabled  NAT: Enabled  Firewall: Enabled  IGMP Multicast: Disabled  Quality Of Service: Disabled  Quality Of Service: Disabled  --> Click "Save" to save these settings. Click "Back" to make any modifications. NOTE: You need to reboot to activate this WAN interface and further configure services over this interface.
Home > Screenshots > NetComm > NB7 > WAN Setup - Summary