Wireless Guest Network Settings for the Netgear CBVG834GRouter Sceenshot

Back to the Netgear CBVG834G



Screenshots from PortForward.com


Residential Gateway Configuration: Wireless Guest Network Settings Guest LAN Settings Current Guest Network null (XX:XX:XX:XX:XX:XX) ZON_1 (XX:XX:XX:XX:XX:XX) FON_ZON_FREE_INTERNET (XX:XX:XX:XX:XX:XX) --> DHCP Server Enabled Disabled IP Address 192.168.   .  Subnet Mask 255.255.255.0 Lease Pool Start 192.168.   .  Lease Pool End 192.168.   .  Lease Time Guest WiFi Settings Enable Guest Network Guest Network Name(SSID): Wireless Card Access List Turn Access Control On Security Options  Disable  WEP(Wired Equivalent Privacy) 64-bit encryption  WEP(Wired Equivalent Privacy) 128-bit encryption  WPA-PSK(Wi-Fi Protected Access Pre-Shared Key)  WPA  WPA2-PSK(Wi-Fi Protected Access 2 Pre-Shared Key)  WPA2 Security Encryption(WEP) Authentication: Open System or Shared Key Shared Key Encryption (WEP) Key: WEP PassPhrase:  Key 1  Key 2  Key 3  Key 4 Encryption (WEP) Key: WEP PassPhrase:  Key 1  Key 2  Key 3  Key 4 Security Encryption (WPA-PSK) Security Encryption (WPA2-PSK) Pre-Shared Key: (8-63 characters) Security Encryption (WPA) Security Encryption (WPA2) Primary Radius Server IP address Radius Port Radius Key
Home > Screenshots > Netgear > CBVG834G > Wireless Guest Network Settings