PPPoE Connection Setup for the Open Networks iConnect625WRouter Sceenshot

Back to the Open Networks iConnect625W



Screenshots from PortForward.com


>Setup>New Connection LAN Setup --> LAN Configuration --> --> WAN Setup --> New Connection --> Modem --> pppoe8_35   --> --> Save/Restart Menu --> Log Out PPPoE Connection Setup Name: Options: NAT  Firewall        Type: PPPoE PPPoA Static DHCP Bridge CLIP Sharing: Disable Enable VLAN VLAN ID: Priority Bits: 0 1 2 3 4 5 6 7   PPP Settings Username:  Password:  Idle Timeout:   secs Keep Alive:   min Authentication:  Auto CHAP PAP MTU:   bytes On Demand:  Default Gateway:  Enforce MTU:  Debug:  PPP Unnumbered:  Valid Rx:  LAN:  LAN group 1    Host Trigger: In Valid Rx:  --> DNS Selection Auto Manual DNS1 DNS2 PVC Settings PVC:  New VPI: VCI: QoS:  UBR CBR VBR-nrt VBR-rt PCR:  cps SCR:  cps MBS:  cells CDVT:  usecs Auto PVC: Point at error markers to see error details Save your configuration changes via the Save/Restart Menu link on the left
Home > Screenshots > Open Networks > iConnect625W > PPPoE Connection Setup