RIP Configuration for the PLC Systems GPN2-4P21-C-CNRouter Sceenshot
PLC Wireless Router Firmware Version : W2000EN-00 setup advanced maintenance status help --> --> --> --> RIP Configuration To activate RIP for the device, select the "Enabled" checkbox for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the "Enabled" checkbox for the interface. Click the "Apply" button to save the configuration, and to start or stop RIP based on the Global RIP Mode selected. RIP Enabled Interface Version Status Helpful Hints... Enabling RIP provides a protocol that determines the best path to a target by estimating the distance in number of hops or intermediate routers. More... Copyright © 2005-2012 PLC Systems, Inc.