Wireless Basics for the PLC Systems GPN2-4P21-C-CNRouter Sceenshot

Back to the PLC Systems GPN2-4P21-C-CN



Screenshots from PortForward.com


PLC Wireless Router      Firmware Version : W2000EN-00 setup advanced maintenance status help Wireless Basics Use this section to configure the wireless settings for your PLC router. Please note that changes made on this section will also need to be duplicated to your wireless clients and PC. Wireless Network Settings    Enable Wireless LAN Interface     Wireless Network Name (SSID) : Visibility Status : Visible Invisible Country : 802.11 Mode : 802.11b only 802.11g only 802.11n only Mixed 802.11b/g Mixed 802.11n/g Mixed 802.11b/g/n Band Width : 20M 40M Upper(+) 40M Lower(-) Wireless Channel : Please take note of your SSID as you will have to duplicate the same settings to your wireless devices and PC. Helpful Hints... Changing your Wireless Network Name is the first step in securing your wireless network. We recommend that you change it to a familiar name that does not contain any personal information. We recommend that you Enable Auto Scan Channel so that the router can select the best possible channel for your wireless network to operate on. More... Copyright © 2005-2012 PLC Systems, Inc.
Home > Screenshots > PLC Systems > GPN2-4P21-C-CN > Wireless Basics