Wireless Security for the Pirelli DRG A124GRouter Sceenshot

Back to the Pirelli DRG A124G



Screenshots from PortForward.com


Security The router can transmit your data securely over the wireless network. Matching security mechanisms must be setup on your router and wireless client devices. You can choose the allowed security mechanisms in this page and configure them in the sub-pages. Allowed Client Type:  No WEP, No WPA WEP Only WPA Only WEP WEP is the basic mechanism to transmit your data securely over the wireless network. Matching encryption keys must be setup on your router and wireless client devices to use WEP. WEP Mode 64-bit    128-bit Key Entry Metdod Hex       ASCII Key Provisioning Static    Dynamic Static WEP Key Setting 10/26 hex digits for 64-WEP/128-WEP Default Key ID 1 2 3 4 Passphrase    (1~32 characters) Key 1 Key 2 Key 3 Key 4   WPA WPA is a security enhancement that strongly increases the level of data protection and access control for existing wireless LAN. Matching authentication and encryption methods must be setup on your router and wireless client devices to use WPA. WPA mode WPA WPA2 WPA/WPA2 Mixed Mode Cypher suite AUTO for WPA, AES for WPA2 AES for both WPA and WPA2 Authentication 802.1X     Pre-shared Key Pre-shared key type Passphrase (8~63 characters)    Hex (64 digits) Pre-shared Key Group Key Re_Keying Per Seconds Per K Packets Disable 802.1X This part allows you to set the 802.1X, a method for performing authentication to wireless connection.  These parameters are used for this access point to connect to the Authentication Server. 802.1X Authentication Enable    Disable Session Idle Timeout Seconds ( 0 for no timeout checking ) Re-Authentication Period Seconds ( 0 for no re-authentication ) Quiet Period Seconds after authentication failed Server Type RADIUS RADIUS Server Parameters Server IP . . . Server Port Secret Key NAS-ID
Home > Screenshots > Pirelli > DRG A124G > Wireless Security