Virtual Server for the Pirelli NetGate VoIP v2Router Sceenshot

Back to the Pirelli NetGate VoIP v2



Screenshots from PortForward.com


Virtual Server You can configure the router as a virtual server so that remote users accessing services such as the Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the VoIP Router redirects the external service request to the appropriate server (located at another internal IP address). This tool can support both port ranges, multiple ports, and combinations of the two. For example: Port Ranges: ex. 100-150 Multiple Ports: ex. 25,110,80 Combination: ex. 25-100,80 No. Public IP Address --> LAN IP Address Protocol Type LAN Port Public Port Enable   1 192.168.1. TCP UDP TCP&UDP 2 192.168.1. TCP UDP TCP&UDP 3 192.168.1. TCP UDP TCP&UDP 4 192.168.1. TCP UDP TCP&UDP 5 192.168.1. TCP UDP TCP&UDP 6 192.168.1. TCP UDP TCP&UDP 7 192.168.1. TCP UDP TCP&UDP 8 192.168.1. TCP UDP TCP&UDP 9 192.168.1. TCP UDP TCP&UDP 10 192.168.1. TCP UDP TCP&UDP 11 192.168.1. TCP UDP TCP&UDP 12 192.168.1. TCP UDP TCP&UDP 13 192.168.1. TCP UDP TCP&UDP 14 192.168.1. TCP UDP TCP&UDP 15 192.168.1. TCP UDP TCP&UDP 16 192.168.1. TCP UDP TCP&UDP 17 192.168.1. TCP UDP TCP&UDP 18 192.168.1. TCP UDP TCP&UDP 19 192.168.1. TCP UDP TCP&UDP 20 192.168.1. TCP UDP TCP&UDP
Home > Screenshots > Pirelli > NetGate VoIP v2 > Virtual Server