Internet Setup for the Prolink Hurricane 6300GLRouter Sceenshot
Back to the Prolink Hurricane 6300GL
ATM VC Virtual Circuit : PVC0 PVC1 PVC2 PVC3 PVC4 PVC5 PVC6 PVC7 Status : Activated Deactivated VPI : (range: 0~255) VCI : (range: 1~65535) QoS ATM QoS : CBR UBR rtVBR nrtVBR PCR : cells/second SCR : cells/second MBS : cells Encapsulation ISP : Dynamic IP Address Static IP Address PPPoE/PPPoA Bridge Mode PPPoE/PPPoA Username : Password : Encapsulation : PPPoE LLC PPPoE VC-Mux PPPoA LLC PPPoA VC-Mux Half Bridge : Activated Deactivated Connection Setting Connection : Always On (Recommended) Connect On-Demand (Close if idle for minutes) Connect Manually TCP MSS Option : TCP MSS(0 means use default) bytes IP Address Get IP Address : Static Dynamic Static IP Address : IP Subnet Mask : Gateway : NAT : Disabled Enable Default Route : Yes No TCP MTU Option : TCP MTU(0 means use default) bytes Dynamic Route : RIP1 RIP2-B RIP2-M Direction None Both IN Only OUT Only Multicast : Disabled IGMP v1 IGMP v2
