Wireless - Advanced for the Quicktel QAR367EWRouter Sceenshot

Back to the Quicktel QAR367EW



Screenshots from PortForward.com


Wireless -- Advanced This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used. Click "Apply" to configure the advanced wireless options. Band: 2.4GHz Channel: Current Channel: Auto Channel Timer(min) 802.11n/EWC: Auto Disabled Bandwidth: 20MHz in Both Bands 40MHz in Both Bands 20MHz in 2.4G Band and 40MHz in 5G Band Current Bandwidth: Control Sideband: Lower Upper Current Control Sideband: 802.11n Rate: 802.11n Protection: Off Auto Support 802.11n Client Only: Off On 54g™ Rate: Multicast Rate: Basic Rate: Fragmentation Threshold: RTS Threshold: DTIM Interval: Beacon Interval: XPress™ Technology: Disabled Enabled 54g™ Mode: 54g Auto 54g Performance 54g LRS 802.11b Only 54g™ Protection: Off Auto Regulatory Mode: Disabled 802.11h 802.11d Pre-Network Radar Check: In-Network Radar Check: TPC Mitigation(db): 0(off) 2 3 4 Afterburner Technology: Disabled Enabled Preamble Type: long short Transmit Power: 20% 40% 60% 80% 100% WMM(Wi-Fi Multimedia): Auto Disabled Enabled WMM No Acknowledgement: Disabled Enabled WMM APSD: Disabled Enabled
Home > Screenshots > Quicktel > QAR367EW > Wireless - Advanced