Wireless - Security for the Quicktel QAR367EWRouter Sceenshot

Back to the Quicktel QAR367EW

Screenshots from PortForward.com

Wireless -- Security This page allows you to configure security features of the wireless LAN interface. You may choose either Wifi Simple Configuration (WSC) or manual configuration. WSC Setup AP Configure all security settings with an external registar. This will overwrite existing settings. Setup AP: Push-Button PIN          Help Manual Setup AP You can set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Click "Save/Apply" when done. Select SSID: Deutsch Guest Guest1 Guest2     Network Authentication: Open Shared 802.1X WPA WPA-PSK WPA2 WPA2 -PSK Mixed WPA2/WPA Mixed WPA2/WPA -PSK WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: WPA Pre-Shared Key:    Click here to display WPA Group Rekey Interval: RADIUS Server IP Address: RADIUS Port: RADIUS Key: WPA Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Current Network Key: Network Key 1: Network Key 2: Network Key 3: Network Key 4:   Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys   Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys     WSC Add Client This feature is available only when WPA PSK or WPA2 PSK is configured. Add a client: Push-Button PIN          Click here to display
Home > Screenshots > Quicktel > QAR367EW > Wireless - Security