Connection Configuration for the Qwest 3347-02Router Sceenshot

Back to the Qwest 3347-02



Screenshots from PortForward.com


Connection Configuration Connection Configuration Connection Configuration VPI: VCI: Protocol: PPP over ATM VC muxed PPP over ATM LLC/SNAP PPP over Ethernet LLC/SNAP PPP over Ethernet VC muxed RFC-1483 Bridged Ethernet LLC/SNAP RFC-1483 Routed IP LLC/SNAP Bridging: Disabled Enabled Concurrent Bridging/Routing: Disabled Enabled Autosensing: Off PPPoE/DHCP PPPoE/PPPoA     User Name:        Password:       My ISP does not require a username and password.   Select the IP Type: Dynamic IP - DHCP(Default) Single Static IP Address Block of Static IP Addresses (Unnumbered Mode) Select the DNS type: Dynamic DNS Addresses (Default)   Static DNS Addresses   Connection Type: On-Demand Always ON Manual   UPnP: 
Home > Screenshots > Qwest > 3347-02 > Connection Configuration