LAN Interface Setup for the Repotec RP-WR1440ARouter Sceenshot

Back to the Repotec RP-WR1440A



Screenshots from PortForward.com


LAN Interface Setup LAN Interface Setup This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point. Here you may change the setting for IP addresss, subnet mask, DHCP, etc.. IP Address: Subnet Mask: DHCP Server: Disabled Enabled DHCP Client Range: -   802.1d Spanning Tree: Disabled Enabled   Enable UPnP   
Home > Screenshots > Repotec > RP-WR1440A > LAN Interface Setup