Operation Mode for the Repotec RP-WR1440ARouter Sceenshot

Back to the Repotec RP-WR1440A

Screenshots from PortForward.com

Operation Mode Operation Mode You can setup different modes to LAN and WLAN interface for NAT and bridging function. Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client or static IP. Bridge: In this mode, all ethernet ports and wireless interface are bridged together and NAT function is disabled. All the WAN related function and firewall are not supported.      
Home > Screenshots > Repotec > RP-WR1440A > Operation Mode