Setup Wizard for the Repotec RP-WR1440ARouter Sceenshot

Back to the Repotec RP-WR1440A

Screenshots from

Setup Wizard Setup Wizard The setup wizard will guide you to configure access point for first time. Please follow the setup wizard step by step. Welcome to Setup Wizard. The Wizard will guide you the through following steps. Begin by clicking on Next. Setup Operation Mode Choose your Time Zone Setup LAN Interface Setup WAN Interface Wireless LAN Setting Wireless Security Setting >" name=next> 1. Operation Mode You can setup different modes to LAN and WLAN interface for NAT and bridging function. Gateway: In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs in four LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by using PPPOE, DHCP client, PPTP client or static IP. Bridge: In this mode, all ethernet ports and wireless interface are bridged together and NAT function is disabled. All the WAN related function and firewall are not supported. >" name=next> 2. Time Zone Setting You can maintain the system time by synchronizing with a public time server over the Internet.   Enable NTP client update Time Zone Select : (GMT-12:00)Eniwetok, Kwajalein (GMT-11:00)Midway Island, Samoa (GMT-10:00)Hawaii (GMT-09:00)Alaska (GMT-08:00)Pacific Time (US & Canada); Tijuana (GMT-07:00)Arizona (GMT-07:00)Mountain Time (US & Canada) (GMT-06:00)Central Time (US & Canada) (GMT-06:00)Mexico City, Tegucigalpa (GMT-06:00)Saskatchewan (GMT-05:00)Bogota, Lima, Quito (GMT-05:00)Eastern Time (US & Canada) (GMT-05:00)Indiana (East) (GMT-04:00)Atlantic Time (Canada) (GMT-04:00)Caracas, La Paz (GMT-04:00)Santiago (GMT-03:30)Newfoundland (GMT-03:00)Brasilia (GMT-03:00)Buenos Aires, Georgetown (GMT-02:00)Mid-Atlantic (GMT-01:00)Azores, Cape Verde Is. (GMT)Casablanca, Monrovia (GMT)Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London (GMT+01:00)Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna (GMT+01:00)Belgrade, Bratislava, Budapest, Ljubljana, Prague (GMT+01:00)Barcelona, Madrid (GMT+01:00)Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT+01:00)Paris (GMT+01:00)Sarajevo, Skopje, Sofija, Warsaw, Zagreb (GMT+02:00)Athens, Istanbul, Minsk (GMT+02:00)Bucharest (GMT+02:00)Cairo (GMT+02:00)Harare, Pretoria (GMT+02:00)Helsinki, Riga, Tallinn (GMT+02:00)Jerusalem (GMT+03:00)Baghdad, Kuwait, Riyadh (GMT+03:00)Moscow, St. Petersburg, Volgograd (GMT+03:00)Mairobi (GMT+03:30)Tehran (GMT+04:00)Abu Dhabi, Muscat (GMT+04:00)Baku, Tbilisi (GMT+04:30)Kabul (GMT+05:00)Ekaterinburg (GMT+05:00)Islamabad, Karachi, Tashkent (GMT+05:30)Bombay, Calcutta, Madras, New Delhi (GMT+06:00)Astana, Almaty, Dhaka (GMT+06:00)Colombo (GMT+07:00)Bangkok, Hanoi, Jakarta (GMT+08:00)Beijing, Chongqing, Hong Kong, Urumqi (GMT+08:00)Perth (GMT+08:00)Singapore (GMT+08:00)Taipei (GMT+09:00)Osaka, Sapporo, Tokyo (GMT+09:00)Seoul (GMT+09:00)Yakutsk (GMT+09:30)Adelaide (GMT+09:30)Darwin (GMT+10:00)Brisbane (GMT+10:00)Canberra, Melbourne, Sydney (GMT+10:00)Guam, Port Moresby (GMT+10:00)Hobart (GMT+10:00)Vladivostok (GMT+11:00)Magadan, Solomon Is., New Caledonia (GMT+12:00)Auckland, Wllington (GMT+12:00)Fiji, Kamchatka, Marshall Is. NTP server : - North America - North America - North America - Europe - Europe - Australia - Asia Pacific >" name=next> 3. LAN Interface Setup This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point. Here you may change the setting for IP addresss, subnet mask, DHCP, etc.. IP Address: Subnet Mask: >" name=next> 4. WAN Interface Setup This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to static IP, DHCP, PPPoE or PPTP by click the item value of WAN Access type. WAN Access Type: Static IP DHCP Client PPPoE PPTP IP Address: Subnet Mask: Default Gateway: User Name: Password: IP Address: Subnet Mask: Server IP Address: User Name: Password: Attain DNS Automatically Set DNS Manually DNS : >" name=next> 5. Wireless Basic Settings This page is used to configure the parameters for wireless LAN clients which may connect to your Access Point.   Disable Wireless LAN Interface Band: 2.4 GHz (B) 2.4 GHz (G) 2.4 GHz (B+G) Mode: AP WDS AP+WDS SSID: Country: USA(FCC) Canada(IC) Europe(ETSI) Spain France Japan(MKK) Channel Number: Auto 1 2 3 4 5 6 7 8 9 10 11 12 13 >" name=next> 6. Wireless Security Setup This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could prevent any unauthorized access to your wireless network. Encryption:  None WEP WPA (TKIP) WPA2(AES) WPA2 Mixed Key Length: 64-bit 128-bit Key Format: ASCII (5 characters) Hex (10 characters) Default Tx Key: Key 1 Key 2 Key 3 Key 4 Encryption Key 1: Encryption Key 2: Encryption Key 3: Encryption Key 4: Pre-Shared Key Format: Passphrase Hex (64 characters) Pre-Shared Key:
Home > Screenshots > Repotec > RP-WR1440A > Setup Wizard