Wireless Advanced Settings for the Repotec RP-WR1440ARouter Sceenshot

Back to the Repotec RP-WR1440A



Screenshots from PortForward.com


Wireless Advanced Setting Wireless Advanced Settings These settings are only for more technically advanced users who have a sufficient knowledge about wireless LAN. These settings should not be changed unless you know what effect the changes will have on your Access Point. Authentication Type: Open System   Shared Key   Auto Fragment Threshold: (256-2346) RTS Threshold: (0-2347) Beacon Interval: (20-1024 ms) Data Rate: Auto 1M 2M 5.5M 11M 6M 9M 12M 18M 24M 36M 48M 54M Tx Operation Rate: 1M    2M   5.5M   11M   6M   9M   12M   18M   24M   36M   28M   54M   Tx Basic Rate: 1M    2M   5.5M   11M   6M   9M   12M   18M   24M   36M   28M   54M   DTIM Period: (1-255) -- for WiFi test, end --> Preamble Type: Long Preamble   Short Preamble Broadcast SSID: Enabled   Disabled IAPP: Enabled   Disabled 802.11g Protection: Enabled   Disabled RF Output Power: 100%   50%   25%   10%   5% Turbo Mode: Auto   Always   Off       
Home > Screenshots > Repotec > RP-WR1440A > Wireless Advanced Settings