System Status for the Ruckus 2211-EXTRouter Sceenshot
Ruckus Wireless Admin Status :: System Operation Mode: Router Local IP Address: 192.168.30.1 MAC Address: DHCP Server: Enabled Starting IP Address: 192.168.30.2 Ending IP Address: 192.168.30.250 DHCP Clients Table IP Address MAC Address Computer Name Lease Expires In 192.168.30.11 22 hrs 50 mins 26 secs 192.168.30.119 23 hrs 2 mins 30 secs System Status The Status page shows the current status and configuration of the system. Operation Mode: This indicates the current operation mode. IP Address / Mask: This is the IP address and network mask of the local network. DHCP Server: This indicates if the DHCP server is enabled or not on the Router. The Router assigns IP addresses to devices, such as personal computers, media centers and so on, on the local network if this is enabled. Starting IP Address / Ending IP Address: This is the range of IP addresses used by devices on the local network. This is valid only when DHCP server is enabled. Connected Devices: This shows a list of devices on the local network which get IP addresses from the Router. For each device entry, it shows the IP Address, MAC Address, Name, Type (wire or wireless connected) and Leasing time of the IP address. A hyperlink is provided for each wireless station which shall bring you to the wireless statistics page.