Access Control for the SMC SMCWGBR14-NRouter Sceenshot

Back to the SMC SMCWGBR14-N

Screenshots from

SMC Draft 11n Wireless Gigabit 4-Port Broadband Router : Advanced / Access Control Virtual Server Special Applications Gaming Streamengine Routing Access Control Web Filter MAC Address Filter Firewall Inbound Filter Advanced Wireless Advanced Network WISH Wi-Fi Protected Setup Configuration Warnings Access Control The Access Control option allows you to control access in and out of your network. Use this feature as Access Controls to only grant access to approved sites, limit web access based on time or dates, and/or block internet access for applications like P2P utilities or games. Access Control Enable Access Control :   You cannot add more rules because the table is full. Policy Table Enable Policy Machine Filtering Logged Schedule     Add New Policy This wizard will guide you through the following steps to add a new policy for Access Control. Step 1 - Choose a unique name for your policy Step 2 - Select a schedule Step 3 - Select the machine to which this policy applies Step 4 - Select filtering method Step 5 - Select filters Step 6 - Configure Web Access Logging Step 1: Choose Policy Name Choose a unique name for your policy. Policy Name : Step 2: Select Schedule Choose a schedule to apply to this policy.   Details : Step 3: Select Machine Select the machine to which this policy applies. Specify a machine with its IP or MAC address, or select "Other Machines" for machines that do not have a policy. Address Type : IP   MAC   Other Machines IP Address : << Computer Name Machine Address : << Computer Name     Machine     Step 4: Select Filtering Method Select the method for filtering. Method : Log Web Access Only Block All Access Block Some Access   Apply Web Filter : Apply Advanced Port Filters : Step 5: Port Filter Add Port Filters Rules. Specify rules to prohibit access to specific IP addresses and ports. Enable Name Dest IP Start Dest IP End Protocol Dest Port Start Dest Port End Any ICMP TCP UDP Any ICMP TCP UDP Any ICMP TCP UDP Any ICMP TCP UDP Any ICMP TCP UDP Any ICMP TCP UDP Any ICMP TCP UDP Any ICMP TCP UDP Step 6: Configure Web Access Logging Web Access Logging : Disabled   Enabled Helpful Hints... Check Enable Access Control if you want to enforce rules that limit Internet access from specific LAN computers. Click Add Policy to start the processes of creating a rule. You can cancel the process at any time. When you are finished creating a rule it will be added to the Policy Table below. Click the Edit icon to modify an existing rule using the Policy Wizard. Click the Delete icon to permanently remove a rule. More...   Copyright 2004-2007 SMC, Inc.  
Home > Screenshots > SMC > SMCWGBR14-N > Access Control