Inbound Filter for the SMC SMCWGBR14-NRouter Sceenshot
SMC Draft 11n Wireless Gigabit 4-Port Broadband Router : Advanced / Inbound Filter Virtual Server Special Applications Gaming Streamengine Routing Access Control Web Filter MAC Address Filter Firewall Inbound Filter Advanced Wireless Advanced Network WISH Wi-Fi Protected Setup Configuration Warnings Inbound Filter Inbound Filter Rules The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Gaming, or Remote Administration features. Add Inbound Filter Rule You cannot add more rules because the table is full. Add Inbound Filter Rule Name : Action : Allow Deny Source IP Range : Enable Source IP Start Source IP End Inbound Filter Rules List Name Action Source IP Range Helpful Hints... Give each rule a Name that is meaningful to you. Each rule can either Allow or Deny access from the WAN. Up to eight ranges of WAN IP addresses can be controlled by each rule. The checkbox by each IP range can be used to disable ranges already defined. The starting and ending IP addresses are WAN-side address. Click the Save button to store a finished rule in the Rules List below. Click the Edit icon in the Rules List to change a rule. Click the Delete icon in the Rules List to permanently remove a rule. More... Copyright © 2004-2007 SMC, Inc.