Wireless WPS for the Sagem Fast 2504n - SkyRouter Sceenshot

Back to the Sagem Fast 2504n - Sky

Screenshots from PortForward.com

Sky Broadband Router > Wireless WPS Skip to top of page Skip to content Setup Wireless Settings Add WPS Client Security Logs Block Sites Firewall Rules Services Schedule Maintenance Router Status Attached Devices Backup Settings Set Password Diagnostics Router Upgrade Advanced Wan Setup Dynamic DNS LAN IP Setup Remote Management UPnP Logout BROADBAND SETUP WIRELESS WPS WPS Add Client Push-Button PIN    WPS Setup AP WPS AP Mode Configured Unconfigured Wireless WPS Help You can use this page to add a device (PC or other device e.g. printer, games console, wireless repeater) to your Sky broadband wireless home network using WPS (Wi-Fi Protected Setup). If your device supports WPS Push Button configuration (consult your device manual) you can press the soft WPS button on your device then browse to this page and select Push-Button and click 'Add Now'. This function replicates the physical WPS button on your router - you can use the settings on this page instead of the physical WPS button on your Sky Router if you cannot easily get to your Router or to save you time if your Router is in another room. If your device supports WPS PIN configuration only and has generated a WPS PIN Select PIN and enter this in the PIN field, then click 'Add Now'. Your device will be securely connected to your Sky wireless home network. WPS Setup AP WPS AP Mode Your Sky router is set to Configured for WPS -we do not recommend that you change this setting unless instructed by support. 2011 BSkyB
Home > Screenshots > Sagem > Fast 2504n - Sky > Wireless WPS