Internet Setup for the Siemens Gigaset 204ARouter Sceenshot

Back to the Siemens Gigaset 204A



Screenshots from PortForward.com


  ATM VC       Connection Service : PVC0 PVC1 PVC2 PVC3 PVC4 PVC5 PVC6 PVC7     Status : Activated Deactivated     VPI : (range: 0~255)     VCI : (range: 1~65535) QoS       ATM QoS : CBR UBR rtVBR nrtVBR     PCR : cells/second     SCR : cells/second     MBS : cells Encapsulation     ISP : Dynamic IP Address       Static IP Address       PPPoA/PPPoE       Bridge Mode PPPoE/PPPoA     Service Name :   User Name :   Password :   Encapsulation : PPPoE LLC PPPoE VC-Mux PPPoA LLC PPPoA VC-Mux Connection Setting     Connection : Always On (Recommended)       Connect On-Demand (Close if idle for minutes)       Connect Manually   TCP MSS Option : TCP MSS(0:default) bytes IP Address     Get IP Address : Static Dynamic   Static IP Address :   IP Subnet Mask :   Gateway :   NAT : Disabled Enable   Default Route : Yes No   TCP MTU Option : TCP MTU(0:default) bytes   Dynamic Route : RIP1 RIP2-B RIP2-M Direction None Both IN Only OUT Only   Multicast : Disabled IGMP v1 IGMP v2 IGMP v3                  
Home > Screenshots > Siemens > Gigaset 204A > Internet Setup