UPnP for the Sky ER110Router Sceenshot

Back to the Sky ER110

Screenshots from PortForward.com

Sky Hub > UPnP Sky Hub Wireless Powerline Ethernet Security Maintenance Advanced Support Licence Information Logout Wireless Settings Wireless WPS Logs Block Sites Firewall Rules Services Schedule Router Status Attached Devices Backup Settings Set Password Diagnostics Router Upgrade WAN Setup Dynamic DNS LAN IP Setup Remote Management UPnP UPnP Universal Plug and Play (UPnP) helps devices access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. Turn UPnP On help Advertisement Period (in minutes): Advertisement Time To Live (in hops): UPnP Portmap Table help Total Entry: 1 Index Active Protocol Int. Port Ext. Port IP Address Refresh Back Next Cancel Apply Turn UPnP On UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is enabled. If disabled, the Sky Hub will not allow any device to automatically control the resources, such as port forwarding (mapping), of your Sky Hub. Select Apply to save the new settings to your Sky Hub Select Cancel to disregard any unsaved changes. Advertisement Period The Advertisement Period is how often the Sky Hub will advertise (broadcast) its UPnP information. This value can range from 1 to 1440 minutes. The default period is for 30 minutes. Shorter durations will ensure that control points have current device status at the expense of additional network traffic. Longer durations may compromise the freshness of the device status but can significantly reduce network traffic. Advertisement Time To Live The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. A hop is the number of steps allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255. The default value for the advertisement time to live is four hops, which should be fine for most home networks. If you notice that some devices aren't being updated or reached correctly, then it may be necessary to increase this value. UPnP Portmap Table The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the Sky Hub and which ports,(Internal and External, that connecting device has opened. The UPnP Portmap Table also displays what type of port is opened and if that port is still active for each IP address. Select Refresh to update the Portmap table and to show the active ports that are currently opened by UPnP devices
Home > Screenshots > Sky > ER110 > UPnP