Wireless Add WPS Client for the Sky ER110Router Sceenshot

Back to the Sky ER110

Screenshots from PortForward.com

Sky Hub > Add WPS Client Sky Hub Wireless Ethernet Security Maintenance Advanced Support Licence Information Logout 2.4 GHz Wireless Settings 5 GHz Wireless Settings Add WPS Client Logs Block Sites Firewall Rules Services Schedule Router Status Attached Devices Backup Settings Set Password Diagnostics Router Upgrade WAN Setup Dynamic DNS LAN IP Setup Remote Management UPnP Add WPS Client You can use this page to add a device, printer, games console or wireless bridge to your wireless home network using WPS (Wi-Fi Protected Setup). WPS Add Client help Push-Button PIN Add WPS Setup AP help WPS AP Mode - (2.4GHz) Configured Unconfigured WPS AP Mode - (5GHz) Configured Unconfigured Cancel Apply WPS Add Client If your device supports WPS Push Button configuration (consult your device manual), you can press the soft WPS button on your device then browse to this page and select Push-Button and click Add . This function replicates the physical WPS button on your Sky Hub You can use the settings on this page instead of the physical WPS button on your Sky Hub if you can't easily get to your Sky Hub or to save you time if your Sky Hub is in another room. If your device supports WPS PIN configuration only and has generated a WPS PIN, choose option Select PIN and enter this eight digit PIN in the PIN field, then click Add . Your device will be securely connected to your wireless home network. WPS Setup AP Your Sky Hub by default Configured to WPS AP Mode.We don't recommend that you change this setting unless instructed to by Sky Technical Support WPS PIN Your eight digit WPS (Wi-Fi Protected Setup) PIN is static and assigned to your Sky Hub by default. You should enter this PIN if requested by a device you are connecting to your Sky Hub. This PIN appears on the bottom of your Sky Hub.
Home > Screenshots > Sky > ER110 > Wireless Add WPS Client