LAN Setup for the TP-Link TD-W8960Nv1.3.6Router Sceenshot

Back to the TP-Link TD-W8960Nv1.3.6

Screenshots from

Local Area Network (LAN) Setup Configure the DSL Modem Router IP Address and Subnet Mask for LAN interface.  GroupName Default   IP Address: Subnet Mask:   Enable IGMP Snooping   Standard Mode   Blocking Mode NOTE: If "LAN side firewall" is enabled, all PCs in the LAN will not able to manage the Router. Please make sure you have set a PC allowed to manage the Router on "Security->IP Filtering->Incoming" page.   Enable LAN side firewall   Disable DHCP Server   Enable DHCP Server Start IP Address: End IP Address: Leased Time (hour): Static IP Lease List: (A maximum 32 entries can be configured) MAC Address IP Address Remove 00:22:48:9E:69:39   Enable DHCP Server Relay DHCP Server IP Address:     Configure the second IP Address and Subnet Mask for LAN interface IP Address: Subnet Mask: