NAT Virtual Servers for the TP-Link TD-W8960Nv1.3.6Router Sceenshot

Back to the TP-Link TD-W8960Nv1.3.6



Screenshots from PortForward.com


NAT -- Virtual Servers Setup Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol and External port) to the Internal server with private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum 32 entries can be configured.   Server Name External Port Start External Port End Protocol Internal Port Start Internal Port End Server IP Address WAN Interface Remove  
Home > Screenshots > TP-Link > TD-W8960Nv1.3.6 > NAT Virtual Servers