Quick Setup for the TP-Link TD-W8960Nv1.3.6Router Sceenshot

Back to the TP-Link TD-W8960Nv1.3.6



Screenshots from PortForward.com


Quick Setup - WAN Configurations You can configure an ATM PVC identifier (VPI and VCI), select your WAN Link Type. VPI: [0-255] VCI: [32-65535] WAN Link Type: PPPoE PPPoA IPoE Bridge IPoA Encapsulation Mode: LLC/SNAP-BRIDGING VC/MUX  (optional) PPP Username: PPP Password: PPPoE Service Name:  (optional)   MTU Size MTU (bytes) [576-1492]:   Dial on demand (with idle timeout timer) Inactivity Timeout (minutes) [1-4320]:   Use Static IPv4 Address  (optional) PPP Static IPv4 Address: WAN IP Address Settings: Use DHCP   Static IP WAN IP Address: WAN Subnet Mask: WAN gateway IP Address: DNS Settings: Obtain Automatically   Set DNS Manually Primary DNS: Secondary DNS:  (optional)
Home > Screenshots > TP-Link > TD-W8960Nv1.3.6 > Quick Setup