Wireless Advanced for the TP-Link TD-W8960Nv1.3.6Router Sceenshot

Back to the TP-Link TD-W8960Nv1.3.6

Screenshots from PortForward.com

Wireless -- Advanced This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point. Tips: If you set Mode to "11n only", you couldn't set Wireless encryption type to "WEP" or "TKIP". Click "Apply/Save" to configure the advanced wireless options. Band: 2.4GHz Channel: Current Channel: Auto Channel Timer(min) 802.11n/EWC: Auto Disabled Mode: Bandwidth: 20MHz 40MHz Current Bandwidth: Control Sideband: Lower Upper Current Control Sideband: 802.11n Rate: 802.11n Protection: Off Auto Support 802.11n Client Only: Off On 54g™ Rate: Multicast Rate: Basic Rate: Fragmentation Threshold: RTS Threshold: DTIM Interval: Beacon Interval: Global Max Clients: XPress™ Technology: Disabled Enabled 54g™ Mode: 54g Auto 54g Performance 54g LRS 802.11b Only 54g™ Protection: Off Auto Regulatory Mode: Disabled 802.11h 802.11d Pre-Network Radar Check: In-Network Radar Check: TPC Mitigation(db): 0(off) 2 3 4 Afterburner Technology: Disabled Enabled (Disable WMM for Selection) Preamble Type: long short Transmit Power: 20% 40% 60% 80% 100% WMM(Wi-Fi Multimedia): Auto Disabled Enabled WMM No Acknowledgement: Disabled Enabled WMM APSD: Disabled Enabled Iperf Support: Disable Enable Video Error Correction: RX Auto Enable Decode RX Disable Decode TX Enable Sequencer TX Enable Encode
Home > Screenshots > TP-Link > TD-W8960Nv1.3.6 > Wireless Advanced