Wireless Security for the TP-Link TD-W8960Nv1.3.6Router Sceenshot

Back to the TP-Link TD-W8960Nv1.3.6

Screenshots from PortForward.com

Wireless -- Security This page allows you to configure security features of the wireless LAN interface. You may setup configuration manually or through Wi-Fi Protected Setup(WPS)    QSS(WPS)       Enable QSS(WPS): Enabled Disabled       Enable Build-In Registrar: Enabled Disabled       Add Client (This feature is available only when WPA-PSK, WPA2-PSK or OPEN mode is configured) Push-Button PIN        Help       Set WSC AP Mode Configured Unconfigured       Setup AP (Configure all security settings with an external registar) Push-Button PIN              Device PIN:      Help        WSC Add External Registrar           WSC Add External Registrar    Manual Setup AP In order to protect your network from hackers and unauthorized users, it is highly recommended you choose one of the following wireless network security settings. You can set the network authentication method, selecting data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength. Warning: we suggest you not to set WEP encryption to "Enabled" when the device runs in 11n mode. The device's wireless highest speed is 54Mbps in that encryption type. Tips: 11n only mode are not supported when WEP encryption is "Enabled" or WPA Encryption type is "TKIP". Tips: "WPA Encryption" are not allowed to set to "TKIP" when the device runs in 11n mode. Click "Apply/Save" when done. Select SSID: Artesia wl0_Guest1 wl0_Guest2 wl0_Guest3 Network Authentication: WPA2 Preauthentication: Disabled Enabled Network Re-auth Interval: (optional) WPA Pre-Shared Key:    Click here to display (You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters.) WPA Group Rekey Interval: (optional) RADIUS Server IP Address: RADIUS Port: (1-65535) RADIUS Key: (optional) (You can enter ASCII characters between 0 and 63 characters or 0 to 64 Hexadecimal characters.) WPA Encryption: WEP Encryption: Encryption Strength: 128-bit 64-bit Current Network Key: Network Key 1: Network Key 2: Network Key 3: Network Key 4: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys
Home > Screenshots > TP-Link > TD-W8960Nv1.3.6 > Wireless Security