DHCP Settings for the TP-Link TD-W8980Router Sceenshot

Back to the TP-Link TD-W8980



Screenshots from PortForward.com


TP-Link N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No. TD-W8980 0.6.0 0.6 v000e.0 Build 130131 Re.3962n Status Quick Setup Operation Mode Network DHCP Server Dual Band Selection Wireless 2.4GHz Wireless 5GHz USB Settings Route Settings Forwarding Parent Control IPv4 Firewall IPv6 Firewall IPv6 Tunnel Bandwidth Control IP & MAC Binding Dynamic DNS Diagnostic System Tools DHCP Settings Clients List Address Reservation Conditional Pool DHCP Settings This page allows you to set DHCP server which provides TCP/IP configuration for all the PCs connected to the Modem Router in the LAN. Group: Default IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 DHCP Server: Disable Enable DHCP Relay Start IP Address: 192.168.1.100 End IP Address: 192.168.1.199 Lease Time: 1440 minutes (1~2880 minutes, the default value is 1440) Default Gateway: 192.168.1.1 (optional) Default Domain: (optional) DNS Server: 0.0.0.0 (optional) Secondary DNS Server: 0.0.0.0 (optional) Save
Home > Screenshots > TP-Link > TD-W8980 > DHCP Settings