IPv4 Firewall Rules for the TP-Link TD-W8980Router Sceenshot

Back to the TP-Link TD-W8980



Screenshots from PortForward.com


TP-Link N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No. TD-W8980 0.6.0 0.6 v000e.0 Build 130131 Re.3962n Status Quick Setup Operation Mode Network DHCP Server Dual Band Selection Wireless 2.4GHz Wireless 5GHz USB Settings Route Settings Forwarding Parent Control IPv4 Firewall IPv6 Firewall IPv6 Tunnel Bandwidth Control IP & MAC Binding Dynamic DNS Diagnostic System Tools Rule LAN Host WAN Host Schedule IPv4 Firewall Rules This device can restrict the internet behaviour of certain LAN hosts. You can set flexible combined rules by selecting proper "LAN Host", "WAN Host" and "Schedule" to conduct powerful internet access control management. Enable Firewall Default Filtering Rules Allow the packets not specified by any filtering rules to pass through the device Deny the packets not specified by any filtering rules to pass through the device Note: The modem router will first try to match the packet with the enabled filtering rules one y one in the list and apply the first matching rule. If the packet is not specified by any filtering riles in the list, then the Default Filtering Rule will take effect. Save Description LAN Host Target Schedule Rule Status Edit Add New Enable Selected Disable Selected Delete Selected
Home > Screenshots > TP-Link > TD-W8980 > IPv4 Firewall Rules